Knowledge Management System Of Shanghai Institute of Applied Physics, CAS
| Fabrication, morphology and mechanical properties of Al2O3-Al graded coatings on China low activation martensitic steel substrates | |
| Song, BB; Wu, P; Chen, S; Zhang, SP; Yan, D; Xue, L（薛莲） | |
| 2012 | |
| Source Publication | SURFACE AND INTERFACE ANALYSIS
 |
| ISSN | 0142-2421 |
| Volume | 44Issue:4 |
| Abstract | Al2O3, Al2O3/Al and Al2O3-Al graded coatings were fabricated on China low activation martensitic steel and silicon substrates by RF magnetron sputtering. The coating composition and cross-section morphologies were investigated using X-ray photoelectron spectroscopy, Auger electron spectroscopy and field-emission scanning electron microscopy. The mechanical properties of the coatings were studied using nanoindentation, wafer-curvature measurements and microscratch tests. The results show that usable Al2O3-Al graded coatings could be fabricated. With a more continuous compositional gradient, the interface zone was more compact. The hardness and elastic modulus of Al2O3-Al graded coatings were less than those of Al2O3 coatings, but greater than those of Al2O3/Al coatings. After annealing at 773 K for 3 h, the hardness of Al2O3-Al graded coating showed a small increase. The residual stresses in Al2O3-Al graded coatings declined to about 0.3 GPa, compared with the 6.6 GPa for Al2O3 coating. The adhesion of Al2O3 was improved by deposition of Al or Al compositional gradient oxide layers. Copyright (C) 2011 John Wiley & Sons, Ltd. |
| Language | 英语 |
| Funding Project | 应物所项目组 |
| WOS ID | WOS:000303252000013 |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.sinap.ac.cn/handle/331007/13162 |
| Collection | 中科院上海应用物理研究所2011-2019年 |
| Recommended Citation GB/T 7714 | Song, BB,Wu, P,Chen, S,et al. Fabrication, morphology and mechanical properties of Al2O3-Al graded coatings on China low activation martensitic steel substrates[J]. SURFACE AND INTERFACE ANALYSIS,2012,44(4). |
| APA | Song, BB,Wu, P,Chen, S,Zhang, SP,Yan, D,&Xue, L.(2012).Fabrication, morphology and mechanical properties of Al2O3-Al graded coatings on China low activation martensitic steel substrates.SURFACE AND INTERFACE ANALYSIS,44(4). |
| MLA | Song, BB,et al."Fabrication, morphology and mechanical properties of Al2O3-Al graded coatings on China low activation martensitic steel substrates".SURFACE AND INTERFACE ANALYSIS 44.4(2012). |
| Files in This Item: | Download All | |||||
| File Name/Size | DocType | Version | Access | License | ||
| Fabrication, morphol（264KB） | 开放获取 | CC BY-NC-SA | View Download | |||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment