Knowledge Management System Of Shanghai Institute of Applied Physics, CAS
La_(1-x)Mg_xNi_(4.25)Al_(0.75)(x=0.0;0.1;0.2;0.3)合金的结构与储氢性能(英文) | |
吕丽君1; 程宏辉1; 韩兴博1; 雷冠虹1; 唐晓星1; 王呈斌1; 刘卫1; 李晓林1 | |
2016 | |
Source Publication | 稀有金属材料与工程
![]() |
ISSN | 1002-185X |
Volume | v.45;No.354Issue:1Pages:56-61 |
Subtype | 期刊文章 |
Abstract | 采用三步感应熔炼法制备了La_(1-x) Mg_xNi_(4.25)Al_(0.75)(x=0.0,0.1,0.2,0.3)储氢合金,研究了该系列合金的晶体结构和储氢性能。结果表明,当x为0.0和0.1时,合金由单一的La Ni4Al相组成;而x为0.2和0.3时,合金由La Ni4Al相,(La,Mg)Ni3相和AlN i3相构成。随着Mg含量x从0.2增至0.3时,合金的第二相丰度和吸/放氢平衡压明显升高,同时储氢容量减小。研究发现,当Mg添加量x=0.1时,合金除具有良好的储氢容量和低平台压外,其吸氢动力学性能更好。 |
Keyword | 稀土储氢合金 Mg替代 储氢性能 |
Indexed By | 其他 |
Language | 英语 |
Document Type | 期刊论文 |
Identifier | http://ir.sinap.ac.cn/handle/331007/26176 |
Collection | 中科院上海应用物理研究所2011-2020年 |
Affiliation | 1.中国科学院上海应用物理研究所 2.中国科学院大学 3.扬州大学 |
Recommended Citation GB/T 7714 | 吕丽君,程宏辉,韩兴博,等. La_(1-x)Mg_xNi_(4.25)Al_(0.75)(x=0.0;0.1;0.2;0.3)合金的结构与储氢性能(英文)[J]. 稀有金属材料与工程,2016,v.45;No.354(1):56-61. |
APA | 吕丽君.,程宏辉.,韩兴博.,雷冠虹.,唐晓星.,...&李晓林.(2016).La_(1-x)Mg_xNi_(4.25)Al_(0.75)(x=0.0;0.1;0.2;0.3)合金的结构与储氢性能(英文).稀有金属材料与工程,v.45;No.354(1),56-61. |
MLA | 吕丽君,et al."La_(1-x)Mg_xNi_(4.25)Al_(0.75)(x=0.0;0.1;0.2;0.3)合金的结构与储氢性能(英文)".稀有金属材料与工程 v.45;No.354.1(2016):56-61. |
Files in This Item: | Download All | |||||
File Name/Size | DocType | Version | Access | License | ||
La_1_x_Mg_xNi_4__省略_(634KB) | 期刊论文 | 作者接受稿 | 开放获取 | CC BY-NC-SA | View Download |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment