Knowledge Management System Of Shanghai Institute of Applied Physics, CAS
| Investigation of the effect of foaming process parameters on expanded thermoplastic polyurethane bead foams properties using response surface methodology | |
| Zhao, D; Wang, GJ; Wang, MH | |
| 2018 | |
| Source Publication | JOURNAL OF APPLIED POLYMER SCIENCE
 |
| ISSN | 0021-8995 |
| Volume | 135Issue:25Pages:- |
| Subtype | 期刊论文 |
| Abstract | Expanded thermoplastic polyurethane (ETPU) bead foams were fabricated by batch foaming with supercritical CO2 as blowing agent. On the basis of single factor investigation, the response surface methodology based on Box-Behnken Design was used to investigate the influences of saturation pressure, temperature, and soaking time and their interactions on foaming behavior of ETPU. The results showed that saturation temperature was the most significant parameter affecting the expansion ratio, shrinkage ratio, and cell morphology of ETPU. Moreover, there was an interaction effect between saturation temperature and soaking time, wherein the expansion ratio of ETPU was more sensitive to change of soaking time at higher temperature. As the soaking time increased, the shrinkage of ETPU increased firstly and then leveled off, and the cell diameter decreased significantly. By applying the response surface methodology optimization, ETPU bead foams with final expansion ratio of 8.04, mean cell diameter of 74.2 m, and average cell density of 1.46 x 10(7)cell/cm(3) can be obtained while the optimum conditions at saturation pressure of 15 MPa, saturation temperature of 100 degrees C and soaking time for 60 min. In addition, the dual melting peak of ETPU characteristics demonstrated that it is suitable for steam-chest molding technology. (c) 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018, 135, 46327. |
| Keyword | Supercritical Carbon-dioxide Optimization Generation Morphology Technology Butane |
| DOI | 10.1002/app.46327 |
| Indexed By | SCI |
| Language | 英语 |
| WOS ID | WOS:000428701200004 |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.sinap.ac.cn/handle/331007/29056 |
| Collection | 中科院上海应用物理研究所2011-2019年 |
| Affiliation | 1.Zhao, D 2.Wang, GJ 3.Wang, MH |
| Recommended Citation GB/T 7714 | Zhao, D,Wang, GJ,Wang, MH. Investigation of the effect of foaming process parameters on expanded thermoplastic polyurethane bead foams properties using response surface methodology[J]. JOURNAL OF APPLIED POLYMER SCIENCE,2018,135(25):-. |
| APA | Zhao, D,Wang, GJ,&Wang, MH.(2018).Investigation of the effect of foaming process parameters on expanded thermoplastic polyurethane bead foams properties using response surface methodology.JOURNAL OF APPLIED POLYMER SCIENCE,135(25),-. |
| MLA | Zhao, D,et al."Investigation of the effect of foaming process parameters on expanded thermoplastic polyurethane bead foams properties using response surface methodology".JOURNAL OF APPLIED POLYMER SCIENCE 135.25(2018):-. |
| Files in This Item: | Download All | |||||
| File Name/Size | DocType | Version | Access | License | ||
| Investigation of the（1401KB） | 期刊论文 | 作者接受稿 | 开放获取 | CC BY-NC-SA | View Download | |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment